|
INSTALLATION
INSTRUCTIONS
1.
CLEAN AREA WITH WARM SOAPY WATER OR ALCOHOL (remove any dirt or
oils)
2. Dry surface
with lint free towel
3. Lay decal face down and remove paper backing
4. Hold
decal by clear transfer tape (to
be removed later) and place into
position
5. Thoroughly rub decal with squeegee to insure it is stuck into
position
6. Slowly remove
clear transfer tape - this will leave just the die cut decal on the
surface
7. Stand back and admire your new sticker
8. Tell your
friends about www.PDStickerShop.com
|
